Posted: 22 Jul 2014 09:22 AM PDT
Last week we looked at Mason Peck’s ideas on ‘Sprites,’ tiny spacecraft the size of computer chips that could be sent in swarms to targets near and far. I was particularly interested in Peck’s idea of using Jupiter as a massive particle accelerator, bringing huge numbers of Sprites up to speeds in the range of hundreds of kilometers per second. Growing out of Clifford Singer’s insights in the 1970s and given onboard intelligence by Gerald Nordley, the idea of ‘smart pellets’ thus moves beyond a propulsion method to become a fleet of networked space probes.
Perhaps one day we’ll be able to use the tools of nanotechnology to create highly intelligent vehicles of extremely small size, rendering the propulsion problem a bit more tractable. But until we’re at that level, it’s fascinating to see the groundwork being laid in work like Peck’s. Today I want to talk about another experiment with space vehicles that are smaller than a compact disc and as thin as a piece of paper. Pocket Spacecraft are being developed for launch in a CubeSat for a range of potential missions in an energetic attempt at space crowdsourcing.
We’ve already seen crowdsourcing at work in projects like KickSat, which is still in the works in the capable hands of Zachary Manchester at Cornell despite an initial setback last April. KickSat would have deployed a large number of Sprites for early testing, as will, presumably, the follow-up KickSat-2. Some members of the KickSat team have also gone on to work on Pocket Spacecraft, a project that has tapped the skills of volunteers from over twenty countries, and one that has played a major role in conferences like theInterplanetary CubeSat Workshop (MIT) and a Caltech event called Small Satellites: A Revolution in Space Science.
So what are Pocket Spacecraft? The image below gives you the gist of a spacecraft small enough to fit in your pocket, essentially a disk made out of the same material you find in flexible circuit boards. The polyimide disk is ringed by a nickel titanium hoop that contains memory and doubles as an antenna for the diminutive vehicle. Let me quote from the Pocket Spacecraft site to continue the description:
Image: Thin-Film Scout prototype consisting of a polyimide substrate, bonded solar cells and thinned die, printed passive components, antennas and images. Credit: Pocket Spacecraft.
The upshot is that Pocket Spacecraft can be packed tightly, thousands to a single CubeSat ‘mothership.’ We’ve seen that CubeSats are destined to be true workhorses for inexpensive space missions, a fact underlined by recent NASA studies on CubeSats in interplanetary space. In February of 2013, NASA selected 24 small satellites to fly as auxiliary payloads on rockets planned for launch in the next two years, the CubeSats being proposed coming not only from NASA centers (three from JPL) but educational institutions and non-profit organizations.
We’ve also seen that The Planetary Society has been engaged in a lengthy study of solar sails, with plans for its LightSail-1 to be deployed from a CubeSat. Potentially, the tools are all here to allow us to fly CubeSats with different instrument configurations to a wide range of targets in the Solar System using solar sails for propulsion. The Pocket Spacecraft team also speaks about another option, a system based on electrolysis, using solar power to break down liquid fuel. Its CubeSats are radiation hardened and contain the subsystems needed to communicate with Earth as well as to release and photograph the numerous CD-sized Pocket Spacecraft.
Image: An engineering model of a 3U CubeSat, the largest most commonly launched CubeSat format. Credit: Pocket Spacecraft.
Call them ‘Scouts,’ as the Pocket Spacecraft team does. The Scouts house integrated optical and radio transceivers and sensors including an accelerometer, gyroscope, temperature sensor, and single pixel optical sensor. Using online tools including smartphone apps, contributors to the project can take a role in personalizing an individual Scout and, using a Web browser, can participate in science experiments. The more technically inclined can use Arduino tools to run their own software on Scouts, backed by a Web-based integrated development environment.
So the crowdsourced side of this project is engaging because it’s not just a matter of contributing money, but of participating in an active way with a space mission. Some Scouts are to be released from Earth orbit to test their ability to re-enter the atmosphere, taken measurements of the Earth’s thermosphere along the way. Others will be flown on a low energy transfer orbit to the Moon for release and landing on the surface. The attempt is to show that a collaboration of private citizens operating on a shoestring budget can design and build spacecraft that can travel not just into orbit but to the Moon and theoretically further given the new generation of sail-enabled CubeSats now beginning to come online.
The issue I’d be most concerned with in this scenario is communications. Telemetry is to be transmitted either directly from the Scout spacecraft to Earth or through the CubeSat mothership, depending on the distance of the Scout. Pocket Spacecraft says it will take care of the communications infrastructure, which could involve amateur radio equipment at one end and, as Scouts get closer to the Moon, repurposed radio telescopes. Assuming this works, the telemetry is to be made available through a smartphone app as well as public servers.
Image: Lapping (thinning) a pocket spacecraft chip die using diamond ‘sandpaper’ (left) and testing the final part (right). Credit: Pocket Spacecraft.
The theme of miniaturization is the obvious driver for this entire project. From the site:
I’m glad to see that the Pocket Spacecraft team has software development options for Scouts that allow schools or clubs to support up to 50 users for customizing onboard systems. A software Scout simulator and virtual Solar System are being established to test out customization ideas along with swarm communications possibilities. So the intent is to let users be ‘hands-on’ throughout the process from Scout building and lab testing to space operations.
We’ve talked about a future where long-haul ‘swarm’ spacecraft are a possibility, but one that demands huge advances in nanotechnology, artificial intelligence, networking and communications. We get to a future like that by making experiments one step at a time to discover the issues that need to be addressed. We move incrementally forward. Pocket Spacecraft, using off-the-shelf equipment and private money, should engage the interest of the public and, if successful, provide useful data applicable to future feats of miniaturization. Click here for further information.